Dulux Weathershield Exterior One Coat Gloss 2.5L Pure Brilliant White
Coverage 30m square
For wood and metal
Mould resistant paint film
Wipe clean
Weatherproof
For wood and metal
Mould resistant paint film
Wipe clean
Weatherproof
In stock
Only 3 left
SKU
DEC-454827
£35.50
Weathershield One Coat Exterior Gloss from Dulux gives a beautiful high gloss finish and guarantees 6 year weather protection. Apply just one coat to cleaned, primed surfaces in good condition. The weatherproof paint film is mould resistant to minimise staining and flexible to resist cracking. This keeps your paintwork looking better for longer, compared to conventional Dulux gloss paints.
Prepare:
Ensure surfaces to be painted are clean (no dirt, grease or flaking paint) and dry. Sand down the surface to remove any sheen. Refer to health, safety and environmental information. Areas affected by mould, algae, fungi or lichen should be treated with an appropriate fungicidal wash. Prepare bare wood with Weathershield Exterior Preservative Primer+ (BP), wiping off any excess. Prepare bare metal with Dulux Primer & Undercoat for Multi Surfaces.
Stir:
Do not stir or shake before use.
Appliccation:
Apply 2 coats of Weathershield Quick Dry Undercoat to primed surfaces with a brush. Finish with 1 coat of Weathershield One Coat Exterior Gloss. Some dark colours may need a further coat. TIP: it is advisable to only use light colours on south facing resinous wood. Apply only in dry conditions, above 10°C and when bad weather is not forecast.
Dry:
Leave 16 hours to dry. Newly painted doors and windows should not be closed until paint is fully dry
Store:
Store paint in dry conditions and protect from extreme temperatures. TIP: after use firmly secure the lid. To preserve the quality, briefly turn the can upside down and return to upright position to store.
Prepare:
Ensure surfaces to be painted are clean (no dirt, grease or flaking paint) and dry. Sand down the surface to remove any sheen. Refer to health, safety and environmental information. Areas affected by mould, algae, fungi or lichen should be treated with an appropriate fungicidal wash. Prepare bare wood with Weathershield Exterior Preservative Primer+ (BP), wiping off any excess. Prepare bare metal with Dulux Primer & Undercoat for Multi Surfaces.
Stir:
Do not stir or shake before use.
Appliccation:
Apply 2 coats of Weathershield Quick Dry Undercoat to primed surfaces with a brush. Finish with 1 coat of Weathershield One Coat Exterior Gloss. Some dark colours may need a further coat. TIP: it is advisable to only use light colours on south facing resinous wood. Apply only in dry conditions, above 10°C and when bad weather is not forecast.
Dry:
Leave 16 hours to dry. Newly painted doors and windows should not be closed until paint is fully dry
Store:
Store paint in dry conditions and protect from extreme temperatures. TIP: after use firmly secure the lid. To preserve the quality, briefly turn the can upside down and return to upright position to store.
| Beats Amazon | Yes |
|---|
Write Your Own Review
